HowDroid >> Post >> ap fastboot boot failure
Droid Razr AP Fastboot Flash Mode (S) (Boot Failure)
Saturday 25th of August 2012
Hi everyone,I have a Droid Razr (Not Maxx)and it is NOT rooted. I was taking pictures with it and it turned off on me. When I turned it back on, I got this message: AP Fastboot Flash Mode (S) (Boot Failure)0A.74eMC Info: Size 16GBTo return to normal mode-first press power key to power downDevice is LOCKED. Status Code: 0 Battery OKOK to ProgramConnect USBData Cable Invalid CC HAB (DD: nbr, status: 0X0056) I want to know if it's possible to to get my pictures and videos out of my phone in this condition. I did not use an SD card. Any help would be great. Thank you in advance!
Bionic Stuck in Ap Flashboot (Boot Failure); Will not Charge(for reflashing)
Wednesday 29th of February 2012
Hello everyone. I First wanted to say that I have learned a lot from the smart individuals here. I have rooted devices in the past with not too many problems but this Bionic has given me a headache. Any help is appreciated and thank you.Confirmed: Updated Moto drivers and rsd 5.6 work fine and are setup correctly.What happened: I was on the stock bionic (886 i believe). I went to flash the .902 update as i am already rooted and wanted to put ICS on it. It got to step 22/23 and the battery was too low so it failed and stopped. Now every time i turn the phone in, I get the AP fastboot screen with a Boot Failure message. I know of course how this happened, but is there a way to fix it? I cannot reflash without battery power. I left the thing plugged in all night, the device didnt feel warm at all and i've read a few places that AP fastboot mode will not charge a phone.Currently it goes all black, doesn't turn on while the white led is on, in the top right. That LED only appears when i can't turn it on. It goes away and turns on to the AP flash screen again (assuming that it charges just
HELP: Fastboot Flash Failure ... AP Fastboot mode every time on startup! - Page 2
Thursday 22nd of December 2011
Originally Posted by ChuckDz3I am having the same problem as you were. I read through your suggestions but I am still unclear. Basically I am trying to return to stock just as you would be getting it from Verizon (I am selling my phone, no need for root access) When I used the RSD Lite method I failed at the same step you did and now I have the failure flash boot message when I power on my phone. If I reboot into recovery and boot normally I can by pass this message, but I want to be able to turn the phone on normally and boot up. Now to my questions - When you said flash something successfully, what do u mean? what is there to flash? Also when I get to AP Fastboot mode manually and choose option #4 do you mean 'BP SBF Flash' is that option 4? or something else. Side note- Do I need root access to use the RSD lite method? Basically were you successful in using the RSD lite method to return to stock? Any suggestions would be great, thanks in advance.As soon as I get back to my computer in about an hour I'll be able to answer your questions... sit tight until I or someone else can ans
Razr XT912 Boots into AP Fastboot (Recipe Failure)
Monday 06th of May 2013
I'm pretty sure I'm to blame for what's currently going on right now with my phone, but hopefully there's a way to resolve it.Back when the unofficial christmas update came out, I rooted my phone and installed the update, things worked for a while but certain apps (e.g. Chrome) started to really drag and my battery life (which was already bad) started to really suffer. When the official update came out I followed what I thought were the correct instructions for installing it with the DRU - I went back to ICS, unrooted, and installed the JB update. Since then, every time my phone runs out of battery (which is frequent), or I turn off my phone and turn it back on, the phone will automatically boot to AP Fastboot Mode with the screen showing:AP Fastboot Flash Mode (S) (Recipe Failure)0A.77The rest of the screen reads properly depending on the battery state and if it's plugged into my computer.So far, I've tried to image a stock JB rom onto my phone multiple times with the most recent version of the DRU, and with RSD Lite. As far as I know, the rom is not corrupted, but from what I can f
AP Fastboot Flash Mode (S) (Flash Failure)
Monday 26th of December 2011
I rooted my RAZR and everything went perfectly. Used the phone for about a day or so with no problems at all.Suddenly, I went to boot up the phone and got the following message:AP Fastboot Flash Mode (S) (Flash Failure)OA.66Device is LOCKED. Status Code: 0Battery OKOK to ProgramConnect USBData CableWith that, I'm at a loss on how to get my phone back. I've tried pushing down the Vol Up and Vol Down buttons at the same time while booting and tested every option with no success. If you know of anything, please let me know.I've also tried the R3L3AS3D Root Tool but that failed as well. I would hate to have to wait for an .sbf file to get this phone working again, because it is awesome. Thanks in advance for any help that you can offer up.
HELP: Fastboot Flash Failure ... AP Fastboot mode every time on startup!
Monday 19th of December 2011
I'm a bionic owner ... was running stock, unrooted 5.5.893, then used P3Droid's root method and rooted and didn't really do much with it... installed the 43V3R root hack from p3 and dhacker, etc. and just sorta left it there as well...NOW I need to return my phone to Verizon because of the incessant data drops. I'm stock, rooted running 5.5.893 via the official Verizon OTA. The problem is this... instead of being content just re-flashing a non-rooted system like I should have, I jumped right to RSDLite and tried to flash the file here (which I now realize might be only for 5.5.886): Droid Bionic Receives Fastboot Recovery Files - BriefMobileAnd I got a Flash Failure ("FAIL") ... so NOW every time I start my phone up, it boots directly into AP Fastboot Mode and reads:AP Fastboot Flash Mode (S) (Flash Failure)0A.61Battery OKOK to ProgramConnect USBData CableHow do I resolve this? Any help would be GREATLY appreciated! I need to send this phone back TOMORROW!!I can boot normally by holding down pwr + up vol + down vol and selecting "Normal powerup" and I can manually
AP Fastboot (Flash Failure)
Sunday 17th of March 2013
AP Fastboot Flash Mode (S) (Flash Failure)0A.74eMMC Info: Size 16GTo return to normal mode - first press power key to power downDevice is LOCKED. Status Code: 0Battery OKOK to ProgramConnect USBData CableThe above happens on my Droid RAZR every time i restart or boot my phone. Need a simple way to resolve this. I'd also like to update to the newer software that was recently released via OTA and preferably keep ROOT privileges.My current System setup is:System Version6.16.211.XT912.Verizon.en.USModel NumberDROID RAZRAndroid Version4.0.4Baseband VersionCDMA_N_05.11.01PLTEDC_U_09.11.0Webtop versionwt-3.0.0Kernel Version3.0.8-g29cf5e7hudsoncm@il93lnxdroid54 #1SMP PREEMPT Thu Jun 14 15:22:48 CDT 2012Build number6.7.2-180_DHD-16_M4-31If you need any more info, let me know.I am currently able to boot into the OS and use all normal functions of the phone by holding (Vol+ and Vol-) when turning the phone on and selecting "Normal Boot" via the bootloader.
Ap Fastboot (boot Failure)
Wednesday 04th of September 2013
Heeeeelp plzzzz !!! My Droid razr stuck in fastboot mode and want charge!So, i've tried to fastboot my razr back to stock but then i did the ap fastboot, failed.I think about my percentage battery it`s under 50 cuz I've tried any times. So i tried to any ways to charge. But was useless. When i hold the volume down and power for 10 secs while connected to wall charger the phone turn off and when released it the razr come back to the boot failure. What I do ? Any sugestions ??
Stuck in AP Fastboot It says Load kernel (boot) failed Fastboot Reason: Boot Failure
Wednesday 11th of September 2013
Hi allWell I bricked my phone and I'm stuck in AP Fastboot. When I try to start the phone (boot it up from off) It gets as far as the M logo then enters AP fastboot or it might even go directly to fastboot.What I was doing: I was trying to use Matt's Droid RAZR M utility 1.20 option 1 to go back to stock 4.1.2. That's when my problems started. I had nearly 70% battery when i started (now it says "low battery"). Phone set up: Droid RAZR M 4.1.2; Rooted; Locked bootloader; Safestrap 3.12 and backed up; stock slot was still stock and ROM slot 1 was running Eclipse Custom ROM. To be honest I cant remember if i was back in stock ROM slot or ROM slot 1 when I attempted to use Matt's Utility. And I didn't uninstall Safestrap nether prior to using the utility. Don't know how much those factors played into causing my problem. What I have tried: I have tried RSD Lite 6.1.4 with xml.zip files from the Droid-Developers SBF web site. But i keep getting this fail message, "Failed flashing process. 1/19 flash partition "gpt_main0.bin" -> Phone returned Fail." I have
No Valid PIV block in SP for system piv validation failed (system) Fastboot Reason: Boot Failure"
Wednesday 05th of March 2014
i tried flashing my droid razr maxx HD phone using "House of Moto 2.0" and "VRZ_XT926_9.8.1Q-94-1_RSD.xml.zip", but i think the FXZ were the wrong files, now i'm getting AP fastboot errors. how can i fix this? anybody? please tell me there is a way to fix it. please please pleaseeee, thank you!BOOT ERRORS:AP Fastboot Flash Mode (S)10.9B(*) )sha-1e9f557, 2013-09-26 12:31:42)eMMC Info: Size 32GBDevice is LOCKED, Status Code: 0Battery OKTransfer Mode:USB ConnectedNo Valid PIV block in SP for systempiv validation failed (system)Fastboot Reason: Boot Failure" or AP Fastboot Flash Mode (S)10.9B(*) )sha-1e9f557, 2013-09-26 12:31:42)eMMC Info: Size 32GBDevice is LOCKED, Status Code: 0Battery OKTransfer Mode:USB ConnectedFastboot Reason: Flash Failure